Designed with a specific goal in mind
The Triad Wedge Welding system was designed as a safe wedge welder capable of performing several welding tasks, all in one machine. This system is ideal for your in-house fabrication needs to produce tents, tarps, awnings, flags, banners, liners, covers, curtains, bags, tubes, and other projects of a wide range of materials and thickness.
Increase Productivity
The Triad is a fast machine, welding 12 to 14 oz. material at approximately 20 feet per minute. Speeds of 30 feet per minute are possible with thinner materials. This versatile system can weld PVC, PE, PP, Urethane and many other weldable, flexible membranes. It can also weld supported and non-supported material in thickness of 5 to 100 oz.
Smokeless and Noiseless Operation
During the welding process, the Triad will not produce any hazardous smoke as hot air welders do. A more pleasant working environment is also achieved by the noiseless operation the Triad provides.
Reduce Labor Costs
Utilizing a Track System, the Triad can be run with only 1 operator. Set-up is easy on the floor or a table surface and the guides provide accurate results. You can use this as a stationary unit for short weld lengths or as a self-propelled unit for long run welding where the Triad automatically begins moving when the wedge is inserted.
How Does It Work?
The material is placed between the pinch rollers and the hot wedge is inserted. Contact is made between the top and bottom of the material and a melting of the coasting occurs with a certain speed of the material crossing the hot wedge surface. The pinch rollers then apply pressure to the melted coating to create the lasting bond. The combination of wedge temperature, material speed passing over the wedge, and pressure of the pinch rollers results in the welding of various thermoplastics to occur.
The Standard Triad Can Achieve The Following Welds:
| Overlap Weld | 1/2" to 2" weld width |
| Hem Weld | Adjustable pocket size |
| Fin Weld | 1/2" to 2" weld width |
| Tube Weld | 1-1/2" diameter and up |
| Sleeve Weld | 1" diameter and up | |
| Insert Cable Weld | Insert cable into hem while welding, 7/8" max. | |
| Tape Weld | Up to 2" weld width | |
| Channel Weld | Using split wedge | |
TO ORDER, OR FOR MORE INFORMATION CALL 1.800.787.9801
|
