|
|
Zund Tool Heads & Tool Inserts
|
Combi-Head
Tz-R45s + the 1kW Router tool for cutting and milling with Z-axis controlled tangential module, routing and pen module.
- Comes standard with Tools 01: Standard Insert Sleeve + 06: 1kW Router
- Module on left side is a single cutting module that accepts tool inserts 01 - 05
- Module on the right holds the 1kW High performance router for materials up to 2"
- 1kW router head includes high-performance dust extraction
- Suitable for thru-cutting, kiss cutting, drawing, creasing, routing and engraving
Dual Head
Multiple cutting head with two Z-axis controlled tangential modules and one pen module.
- Two head cutting modules for tool inserts 01 - 05
- Comes standard with two, 01 Tools: Standard Insert Sleeve
- Pen module on right for plotting and labeling
- Suitable for thru-cutting, kiss cutting, drawing, creasing
01 Standard Insert Sleeve
Perfect for thru-cutting a wide variety of flexible materials
- Most versatile knife blade
- Can choose from and interchange a large selection of blades for a variety of applications
- Comes standard with a drag knife for flexible materials such as PVC banner, vinyl, polycarbonate, styrene
- Can add a high-speed 3/16" blade for straight cuts on rigid materials such as foamcore, .050" styrene and coroplast
- Up to 39" per second with 1G of acceleration
- 6 - 7X faster than the competition
02 Kiss-Cutting Tool
Perfect for decals and labels.
- Use for most any adhesive product: pressure sensitive vinyl's, polyester, etc
- Up to 39" per second with 1G of acceleration
03 Creasing Tool
Perfect for packaging applications
- Great for folding carton materials
- Performs corrugated creasing
- Up to 39" per second with 1G of acceleration
04 Oscillating Knife
For cutting of soft and middle hard material. Excellent performance for complex curves on rigid materials; picks up curves where the 01:Standard Insert Sleeve stops.
- Typically used to oscillate foamcore, coroplast, gatorfoam, corrugated, posterboard; thicker paper boards
- Pneumatic Oscillating Tool (POT): driven by compressor; stroke of blade is 10mm (just under 1/2")
- Electronic Oscillating Tool (EOT): 1mm stroke: can oscillate up to 2" thick material
- Up to 10" per second depending on thickness with 1/2G acceleration
05 Driven Rotary Knife
For cutting textiles and other fibrous materials, such as Kevlar, carbon fiber, etc.
- "Pizza Wheel" type cutter
- Will cut almost any textile
- Also makes a very nice and extremely effecient cut on banner materials
06 1kW Router
For high-performance routing.
- For routing semi-rigid substrates
- Will route some materials up to 2" thick
- Typically used for routing standard thickness materials such Sintra, DIBOND, Gatorfoam, acrylic, styrene, foamboards, KAPA, FOREX
- Up to 10" per second depending on thickness with 1/2G acceleration
TO ORDER, OR FOR MORE INFORMATION CALL 1.800.787.9801
TO ORDER OR FOR MORE INFORMATION, CALL US AT: 1.800.787.9801
|
|
|
